Where are the canopies made?

Every canopy is fabricated at our workshop at Unit 1/22 Salicki Ave, Epping, Victoria, then delivered to site.

Do you install the canopy in Canberra, or only supply it?

We install. Canopy and ductwork manufacture and installation are handled in-house, so you deal with one team for the whole exhaust system.

What do you need from me to quote a Canberra job?

The site address, a kitchen layout or equipment list, ceiling height, where the duct is expected to run, roof or plant access, and a few photos. With that we can scope the canopy, ductwork and fan.

Is a canopy the same as an exhaust hood?

Yes. Canopy, exhaust canopy, exhaust hood and rangehood all describe the stainless steel hood over a commercial cooking line.

Can you build to a custom size or layout?

Yes. Canopies are made to suit your cooking line and space rather than from a fixed catalogue.

Can builders and shopfitters engage you for just the canopy?

Yes. We take on the canopy and ductwork as a standalone scope or as part of a wider fit-out.

What Australian Standards apply to canopies in the ACT?

Commercial kitchen ventilation is covered by AS 1668.2, alongside building and fire requirements that depend on the site and the approving authority. We fabricate to the design and approvals for your project.

Canberra

Commercial Kitchen Canopies for Canberra Kitchens.

Custom stainless steel exhaust canopies and ductwork, fabricated in Melbourne and supplied to Canberra and the ACT.

Request a Quote

Commercial Kitchen Canopy Manufacturer Supplying Canberra

KS Steel Engineering is a stainless steel fabricator with 13 years of operation, based in Epping, Melbourne. We manufacture commercial kitchen canopies, the exhaust hoods over commercial cooking equipment, and the exhaust ductwork that connects them to the roof.

We have completed a canopy and exhaust project in Canberra, so an interstate site is a job we have done before. The canopy is made in our own workshop and installed by our team, which means one point of contact for design questions, changes during fabrication and the install.

Custom canopies fabricated to your cooking line and ceiling height
Exhaust ductwork, fan boxes and rooftop fans supplied and installed
Stainless steel wall cladding and fire-rated wall systems around the cooking area
Standalone canopy scope or part of a complete kitchen fit-out

Kitchens We Make Canopies For

Any kitchen that cooks with heat, oil or open flame at commercial scale needs mechanical exhaust over the cooking equipment. That covers a wide range of Canberra and ACT businesses.

Restaurants, cafes and takeaways
Hotels, pubs and clubs
Aged care, school and institutional kitchens
Bakeries and food manufacturing sites
Catering and commissary kitchens

Scoping a Canberra Job from Melbourne

For an interstate job we work from information first. Send us the site address, a kitchen layout or equipment list, ceiling height, the expected duct route, how the roof or plant area is accessed, and a few photos. From that we can scope the canopy, ductwork and fan and tell you what we still need to confirm.

Because the canopy is fabricated in our Epping workshop, delivery and installation are planned as one job. Tell us your preferred timing and any constraints on site access, trading hours or the building, and we will plan around them. Builders and shopfitters can engage us to work to their program.

Exhaust Canopy, Ductwork and Fan as One System

A commercial exhaust hood does not work alone. It needs ductwork sized for the airflow, a fan that suits the duct run, and a discharge point on the roof. When the canopy, duct and fan are designed together, the system is easier to commission and maintain. We make and install all three, so there is no gap between a canopy supplier and a duct contractor.

Standards and Approvals in the ACT

Commercial kitchen exhaust in Australia is governed by AS 1668.2, and the performance of surrounding construction is addressed by standards such as AS 1530. The requirements for your premises depend on the building classification, the cooking equipment and the approving authority. We fabricate to the design and approvals for your project.

Made in Epping, Supplied to Canberra

Our workshop is at Unit 1/22 Salicki Ave, Epping VIC 3076. For a Canberra quote, call or message us with the site address and kitchen details.

Other Areas We Supply

The same fabrication, ductwork and installation service, scoped to your location.

For the wider picture, see our full range of services, completed projects and approach to compliance.

Frequently Asked Questions

Yes. We have completed a kitchen exhaust project in Canberra. Canopies are fabricated at our Epping workshop in Melbourne and supplied to the site. Tell us the address and kitchen details and we will scope the job.

Need a Commercial Kitchen Canopy in Canberra?

Send us your site address and cooking line and we will scope the canopy and ductwork.

Request a Quote

No obligation. We’ll get back to you.